|
发表于 2011-6-5 10:42:59
|
显示全部楼层
Toslink – Although this format has the lowest bandwidth, it is one of the more common outputs on low-end products. It also offers ground
isolation between products and noise immunity over long runs. It is unlikely to work at sample rates over 192 kHz.
Coaxial – A good input for short runs and lower frequencies. Limited to 384 kHz, 24 bit data.
BNC – Same as Coaxial but with a BNC connector. Another digital input.
Balanced digital – The AES/EBU Professional input is the preferred input. The balanced nature of this input allows great cable lengths
as well as total noise immunity. Limited to 384 kHz, 24 bit data.
MSB Network – The MSB Network uses CAT-6 cabling. It provides an input for use with other MSB products. It can handle 8 channels
of data up to 384 kHz and 32 bits. The DAC IV can select which audio channels to decode.
……
由此可见,MSB真是一家不可靠的小厂啊 |
|